The Dynapac CS1400 static roller is a modern, articulated three-drum roller with the same static linear load and drum diameter on all drums. The roller covers the asphalt mat with its full width. The CS1400 roller is used primarily to compact asphalt when the course has a typical thickness of up to 50 mm, depending on the stiffness of the asphalt compound and the prevailing weather conditions. The machine is suitable for medium-size and large-size applications. It is ideal for use in areas where the ground should not be vibrated, such as in areas close to old buildings and on bridges.
SERVICE-FRIENDLY LOW EMISSION ENGINE
The Dynapac CS1400 has ample power resources and fulfils the latest Stage IIIB/T4final emission regulations. The engine is easily accessed, as it is placed between the front drums under a large engine hood. All service points are located within easy reach from the ground.
CENTRAL HYDRAULIC TEST PANEL
The Dynapac CS1400 has a central test panel for the hydraulic system, which makes inspection and trouble-shooting swift and simple. The panel – with quick couplings – is easily accessed from the ground, and is well protected inside the articulated hitch.
BRAKE SYSTEM
The Dynapac CS1400 features the same reliable safety brakes as other Dynapac rollers. The brakes are automatically engaged on all three drums in the event of engine malfunction or hydraulic failure. In addition, the reserve/parking brake button on the instrument panel is easily accessible from both operator stations.
ALL EQUAL LOAD
The equal static linear load on the three drums and the centre point articulation makes it possible to calculate with the full 2100 mm compaction width all the time. This gives up to 50% more capacity compared with old pivot steered concepts. The 50% higher capacity means 50% lower fuel consumption and 50% less working time needed.
SpecificationsMassesOperating mass (without ballast) 24,255 lbsMax. operating mass (ballasted) 29,106 lbsMax. front module mass (ballasted) 15,215 lbsMax. rear module mass (ballasted) 13,891 lbsPropulsionType Articulated steeringTurning radius, inside 12 ftTurning radius, outside 19 ftVertical oscillation ±9°Transport speed 0-9 mphWorking speed 0-6 mphCompactionStatic linear load (w/o ballast), front 286 lbs/inStatic linear load (w/o ballast), rear 274 lbs/inMax. static linear load (ballasted), front 336 lbs/inMax. static linear load (ballasted), rear 330 lbs/inRolling width 83 inDrum overlap 1.97 inWater tank 140 galEngineManufacturer/Model Deutz TD 3.6 L4 IIIB/T4FType Water cooled turbo DieselRated power, ISO 14396 55 kW (74 hp ) @ 2,200 rpmFuel tank capacity 29 galHydraulic systemDrivingAxial piston pump with variable displacement.3 axial piston motors, 2 with variable displacement.SteeringGear pump with constant displacement.Service brakeHydrostatic in forward and reverse lever.Parking/Emergency brakeFailsafe multidisc on all 3 drums
The Dynapac CS1400 static roller is a modern, articulated three-drum roller with the same static linear load and drum diameter on all drums. The roller covers the asphalt mat with its full width. The CS1400 roller is used primarily to compact asphalt when the course has a typical thickness of up to 50 mm, depending on the stiffness of the asphalt compound and the prevailing weather conditions. The machine is suitable for medium-size and large-size applications. It is ideal for use in areas where the ground should not be vibrated, such as in areas close to old buildings and on bridges.
SERVICE-FRIENDLY LOW EMISSION ENGINE
The Dynapac CS1400 has ample power resources and fulfils the latest Stage IIIB/T4final emission regulations. The engine is easily accessed, as it is placed between the front drums under a large engine hood. All service points are located within easy reach from the ground.
CENTRAL HYDRAULIC TEST PANEL
The Dynapac CS1400 has a central test panel for the hydraulic system, which makes inspection and trouble-shooting swift and simple. The panel – with quick couplings – is easily accessed from the ground, and is well protected inside the articulated hitch.
BRAKE SYSTEM
The Dynapac CS1400 features the same reliable safety brakes as other Dynapac rollers. The brakes are automatically engaged on all three drums in the event of engine malfunction or hydraulic failure. In addition, the reserve/parking brake button on the instrument panel is easily accessible from both operator stations.
ALL EQUAL LOAD
The equal static linear load on the three drums and the centre point articulation makes it possible to calculate with the full 2100 mm compaction width all the time. This gives up to 50% more capacity compared with old pivot steered concepts. The 50% higher capacity means 50% lower fuel consumption and 50% less working time needed.
SpecificationsMassesOperating mass (without ballast) 24,255 lbsMax. operating mass (ballasted) 29,106 lbsMax. front module mass (ballasted) 15,215 lbsMax. rear module mass (ballasted) 13,891 lbsPropulsionType Articulated steeringTurning radius, inside 12 ftTurning radius, outside 19 ftVertical oscillation ±9°Transport speed 0-9 mphWorking speed 0-6 mphCompactionStatic linear load (w/o ballast), front 286 lbs/inStatic linear load (w/o ballast), rear 274 lbs/inMax. static linear load (ballasted), front 336 lbs/inMax. static linear load (ballasted), rear 330 lbs/inRolling width 83 inDrum overlap 1.97 inWater tank 140 galEngineManufacturer/Model Deutz TD 3.6 L4 IIIB/T4FType Water cooled turbo DieselRated power, ISO 14396 55 kW (74 hp ) @ 2,200 rpmFuel tank capacity 29 galHydraulic systemDrivingAxial piston pump with variable displacement.3 axial piston motors, 2 with variable displacement.SteeringGear pump with constant displacement.Service brakeHydrostatic in forward and reverse lever.Parking/Emergency brakeFailsafe multidisc on all 3 drums
Montre plus
Montrer moins
X
Prix
Année
Condition
1
de un
8
1
de un
8
Équipement De Construction
Camions et remorques
Matériel De Levage
Équipement Agricole
Véhicules
Enchères en Direct
