2017 ميتسو 36 IN
نظرة عامة
الإبلاغ عن مشكلة مع الإعلان
إرشادات السلامة
الوصف
Fabtec 36" Portable Belt Feeder
36"x19' BELT FEEDER
20 HP TEFC motor
5215 Falk shaft mount reducer and №120 Martin sprockets.
2 15/16" Shafts and Dodge SCM bearings.
16" Vulcanized lagged head pulley and self cleaning wing tail pulley.
Close Spacing on Cema C sealed rollers.
3 Ply belt 1/4 cover Vulcanized splice. 15 YARD HOPPER 3/8" PLATE HOPPER WITH REINFORCEMENT CHANNEL. DISCHARGE HEIGHT OF 5' 9"
hopper designed for canoe liners. SINGLE AXLE CARRIER 14" WF 30# BEAMS:
Hutch leaf spring suspension.
22,500 # Axle 11:00Rx22.5 dual tires.
Air brakes, light and mud flaps.
(2) Binkley Landing Gear Jacks
Fold down Side panels to cover lower section of feed hopper HYDRAULIC DUMP GRIZZLY: Reversible dump
Grizzly bars 3/4"x6" FB and 2"Ø round bar.
10 HP TEFC, Vickers V20 pump with spool valve.
4" Bore 36" stroke cylinders.
Hydraulic tank with filter protection.
Remote for hyd dump, E stop and belt feeder
Self relieving Grizzly Electrical: NEMA 4 ENCLOSURE, WITH START AND STOP BUTTONS ON DOOR, AND THE FOLLOWING STARTERS WITH VFD 20 HP VARIABLE SPEED CONTROLLER IN NEMA 12 ENCLOSURE
(1) 20 HP for belt feeder conveyor.
(1) 10 HP hydraulics.
Mounted on support stand with wireless remote for dump and speed of the feeder
20 HP TEFC motor
5215 Falk shaft mount reducer and №120 Martin sprockets.
2 15/16" Shafts and Dodge SCM bearings.
16" Vulcanized lagged head pulley and self cleaning wing tail pulley.
Close Spacing on Cema C sealed rollers.
3 Ply belt 1/4 cover Vulcanized splice. 15 YARD HOPPER 3/8" PLATE HOPPER WITH REINFORCEMENT CHANNEL. DISCHARGE HEIGHT OF 5' 9"
hopper designed for canoe liners. SINGLE AXLE CARRIER 14" WF 30# BEAMS:
Hutch leaf spring suspension.
22,500 # Axle 11:00Rx22.5 dual tires.
Air brakes, light and mud flaps.
(2) Binkley Landing Gear Jacks
Fold down Side panels to cover lower section of feed hopper HYDRAULIC DUMP GRIZZLY: Reversible dump
Grizzly bars 3/4"x6" FB and 2"Ø round bar.
10 HP TEFC, Vickers V20 pump with spool valve.
4" Bore 36" stroke cylinders.
Hydraulic tank with filter protection.
Remote for hyd dump, E stop and belt feeder
Self relieving Grizzly Electrical: NEMA 4 ENCLOSURE, WITH START AND STOP BUTTONS ON DOOR, AND THE FOLLOWING STARTERS WITH VFD 20 HP VARIABLE SPEED CONTROLLER IN NEMA 12 ENCLOSURE
(1) 20 HP for belt feeder conveyor.
(1) 10 HP hydraulics.
Mounted on support stand with wireless remote for dump and speed of the feeder
Fabtec 36" Portable Belt Feeder
36"x19' BELT FEEDER
20 HP TEFC motor
5215 Falk shaft mount reducer and №120 Martin sprockets.
2 15/16" Shafts and Dodge SCM bearings.
16" Vulcanized lagged head pulley and self cleaning wing tail pulley.
Close Spacing on Cema C sealed rollers.
3 Ply belt 1/4 cover Vulcanized splice. 15 YARD HOPPER 3/8" PLATE HOPPER WITH REINFORCEMENT CHANNEL. DISCHARGE HEIGHT OF 5' 9"
hopper designed for canoe liners. SINGLE AXLE CARRIER 14" WF 30# BEAMS:
Hutch leaf spring suspension.
22,500 # Axle 11:00Rx22.5 dual tires.
Air brakes, light and mud flaps.
(2) Binkley Landing Gear Jacks
Fold down Side panels to cover lower section of feed hopper HYDRAULIC DUMP GRIZZLY: Reversible dump
Grizzly bars 3/4"x6" FB and 2"Ø round bar.
10 HP TEFC, Vickers V20 pump with spool valve.
4" Bore 36" stroke cylinders.
Hydraulic tank with filter protection.
Remote for hyd dump, E stop and belt feeder
Self relieving Grizzly Electrical: NEMA 4 ENCLOSURE, WITH START AND STOP BUTTONS ON DOOR, AND THE FOLLOWING STARTERS WITH VFD 20 HP VARIABLE SPEED CONTROLLER IN NEMA 12 ENCLOSURE
(1) 20 HP for belt feeder conveyor.
(1) 10 HP hydraulics.
Mounted on support stand with wireless remote for dump and speed of the feeder
20 HP TEFC motor
5215 Falk shaft mount reducer and №120 Martin sprockets.
2 15/16" Shafts and Dodge SCM bearings.
16" Vulcanized lagged head pulley and self cleaning wing tail pulley.
Close Spacing on Cema C sealed rollers.
3 Ply belt 1/4 cover Vulcanized splice. 15 YARD HOPPER 3/8" PLATE HOPPER WITH REINFORCEMENT CHANNEL. DISCHARGE HEIGHT OF 5' 9"
hopper designed for canoe liners. SINGLE AXLE CARRIER 14" WF 30# BEAMS:
Hutch leaf spring suspension.
22,500 # Axle 11:00Rx22.5 dual tires.
Air brakes, light and mud flaps.
(2) Binkley Landing Gear Jacks
Fold down Side panels to cover lower section of feed hopper HYDRAULIC DUMP GRIZZLY: Reversible dump
Grizzly bars 3/4"x6" FB and 2"Ø round bar.
10 HP TEFC, Vickers V20 pump with spool valve.
4" Bore 36" stroke cylinders.
Hydraulic tank with filter protection.
Remote for hyd dump, E stop and belt feeder
Self relieving Grizzly Electrical: NEMA 4 ENCLOSURE, WITH START AND STOP BUTTONS ON DOOR, AND THE FOLLOWING STARTERS WITH VFD 20 HP VARIABLE SPEED CONTROLLER IN NEMA 12 ENCLOSURE
(1) 20 HP for belt feeder conveyor.
(1) 10 HP hydraulics.
Mounted on support stand with wireless remote for dump and speed of the feeder
