2007 كاتربيلر 140H

2007 Caterpillar 140H Motorgrader, Caterpillar 3176C DITA ATAAC VHP 185HP Engine, Max Operation Weight of 46,872 lbs, Blade Down Pressure of 28,697 lbs.

The 140H blends productivity and durability to give you the best return on your investment.

Features
Engine

The Cat 3176 ETA is designed to handle the tough loads. Variable Horsepower matches torque curves to the gear, to maximize response, power and efficiency. Low fuel consumption reduces operating costs and reduces environmental impact.


Power Train

The power shift transmission takes full advantage of the powerful 3176 ETA engine. Variable Horsepower uses specific torque curves for each gear
range for optimum performance. Dual air system and multi-disc oil brakes assure reliable braking control.

Hydraulics

The load-sensing hydraulic system lowers power consumption and system heat. The advanced PPPC control valves provide low lever effort, balanced flow and consistent cylinder speeds for outstanding blade control. Blade float is incorporated into the blade lift valves.

Operator’s Station

Low effort blade controls, electronic throttle control, EMS III monitoring system, and improved ventilation provide world-class operator control and comfort. Improved visibility to the front and rear increase operator confidence and productivity.

Environmentally Responsible Design

New engine arrangements and operator station designs reduce emissions and meet current and anticipated regulations for interior and exterior sound levels, emissions, exhaust.


Specifications

Engine
Number Of Cylinders
6

Net Power Gear 4-6
185hp

Engine Make
2236

Engine Model
3176C DITA ATAAC VHP

Net Power Gear 1-2
165hp

Power Measured @
2000rpm

Net Power Gear 5-6
185hp

Max Power
185hp

Net Power Gears 7-8
185hp

Displacement
629cu in

Operational
Std Operation Weight - Front Axle
9123lb

Hydraulic System Fluid Capacity
20.8gal

Std Operation Weight - Rear Axle
23234lb

Std Operation Weight - Total
32357lb

Max Operation Weight - Front Axle
16733lb

Max Operation Weight - Rear Axle
30139lb

Max Operation Weight - Total
46872lb

Fuel Capacity
105gal

Cooling System Fluid Capacity
10gal

Rear Diff/Final Drive Fluid Capacity
12.4gal

Circle Gearbox Fluid Capacity
1.8gal

Tandem Case Fluid Capacity (Each)
16.9gal

Steering
Articulation Angle
20 degrees

Turning Radius
24.6ft in

Transmission
Transmission Type
direct drive, power shift

Number Of Gears - Forward
8

Number Of Gears - Reverse
6

Max Speed - Forward
27.4mph

Max Speed - Reverse
21.6mph

Front Axle
Wheel Lean
18 degrees

Oscillation - Total
32 degrees

Ground Clearance
2ft in

Moldboard
Moldboard Width
12ft in

Moldboard Height
24in

Moldboard Thickness
0.9in

Max Depth Of Cut
28.1in

Side Shift Left
20.6in

Side Shift Right
26in

Blade Pull At Max Weight
42184lb

Blade Down Pressure
28697.6lb

Hydraulic System
Pump Type
axial piston

Pump Flow
54.4gal/min

Relief Valve Pressure
3500psi

Circle
Diameter
60.2in

Shift Left
27.4in

Shift Right
28.7in

Max Reach Outside Tires - Left
74.6in

Max Reach Outside Tires - Right
77.9in

Max Lift Above Ground
18.9in

Blade Tip Angle - Front
40 degrees

Blade Tip Angle - Rear
5 degrees

*Hours as of Aug 2020*